Home > News > Content

Packaging Machine Daily Maintenance And Maintenance

Mar 02, 2019

Packaging machine daily maintenance and maintenance

The packaging equipment must be operated by a fixed person and can be proficient in starting and bag making procedures, simple instrument debugging, changing parameters, etc.; mechanical instrument debugging personnel must be strict by FINE manufacturers, can master the instrument performance, work Program, operation mode, working status, common troubleshooting and handling; computer instruments are strictly prohibited from being operated by personnel. 

Daily maintenance must ensure that the computer instrument box is clean and dry inside and outside; the terminal block is not checked for looseness or shedding. Ensure that the circuit and airway are unblocked.

Basic cleaning includes

 1. The measuring part should be cleaned in time after shutdown. For example, the packaged sugar, sapphire root, salt, etc., must ensure that the cleaning tray and turntable are cleaned every time. 

2. For the heat seal body, it should be cleaned frequently to ensure the clear texture of the seal. 

3. Photoelectric tracking light head, that is, the electric eye should also be cleaned regularly to ensure small error of cursor tracking. 

4. The materials scattered on the tray should be cleaned in time to keep the parts clean. 

5. Regularly clean the dust inside the electric control box to prevent malfunctions such as poor contact. 

The newly installed machinery must check and fasten the transmission and moving parts within one week of use, and refuelling and maintenance; monthly maintenance must be checked regularly; 

Basic maintenance:

 1. Regularly check the screws of each part of the packaging machine to avoid looseness. 

2. Pay attention to the waterproof, moisture-proof, anti-corrosion and anti-rat parts of the electrical parts. The electrical control box and terminal block should be kept clean to prevent electrical failure. 

3. When the machine is stopped, the two heat sealing rollers should be in the open position to prevent the packaging material from being burnt. 

4. Timing the gear meshing part of the packaging machine, the bearing oil filling hole and the moving parts are lubricated with oil. When filling the lubricating oil, please be careful not to drop the oil on the transmission belt to prevent the slipping or the belt from aging damage.