Double Twist Candy Packing Machine

Product Details

Full Automatic Double Twist Packing Machine For Candy And Toffee

Main Features

1.High-density cam indexing unit, cam gear transmission.

2.Automatic bag length adjustment, Double layer films available..

3.Equipped with Automatic photocell avoiding film-cutting error.

4.Connected part with food is stainless steel structure, no pollution, high level food hygiene.

5.Frequency converter, stepless speed regulation.

Optional accessories & special versions

-Stainless steel frame

-Date coder

-Auto vibration device


This Pillow Packing Machine is widely used as below:

Food industry: Soft Candy, Chocolate, Toffee, Hard candy, scotch, etc.

Medical catalogue: ellipse, cylindrical, waist round, block, square, etc.

Food industry: Chocolate, Toffee, Hard candy, scotch, etc.
Product shape: ellipse, cylindrical, waist round, block, square, etc.


Main Features


1.High-density cam indexing unit, cam gear transmission.
2.Automatic bag length adjustment, Double layer films available..

3.Equipped with Automatic photocell avoiding film-cutting error.

4.Connected part with food is stainless steel structure, no pollution, high level food hygiene.
5.Frequency converter, stepless speed regulation.

Optional accessories & special versions
-Stainless steel frame
-Date coder
-Auto vibration device


Inspection preparation:
1., after the business contact list is out, understand the production time / progress, and arrange the inspection time.
2. understand the production plant, the production variety in advance, understand the general contents of the contract, be familiar with the production requirements and the quality requirements of our company, and be familiar with the key points of the inspection standards, requirements and inspection.
3. after knowing the general requirements, what defects should be identified for the goods tested? We should focus on easy problems and flexible handling methods. We must be careful when examining goods.
4. understand the time of big goods coming out and arrange to arrive at the factory on time.
5. necessary instruments for inspection (scale, densitometer, calculator, etc.) and inspection forms (specific scoring tables, key project scoring tables, general tables) and the necessary necessities of their own.

Two. Carry out the test:
After 1. to the factory, a preliminary contact with the factory contacts to understand the general situation of the factory, including the system, the time of the plant, the number of workers, the situation of the machine and the efficiency of the factory and so on. Special attention should be paid to quality control, requiring them to attach importance to quality and strictly examine them. Preliminary communication with the inspection staff, a general understanding of the factory's personnel status, such as: the finished product, quality inspection department and the responsible person of production.
2. to the factory inspection workshop to see the inspection of the factory inspectors, understand the factory inspection strictly or not, and understand the inspection basis of the factory, the inspection system, and the treatment of some serious defects; at the same time, we can also get to the production workshop to understand the production of our goods and so on.
3. to implement inspection sites (such as inspection platform), equipment (such as heavy machine, tape measure, calculator, etc.).
4. normally, the factory's opinions and arrangements should be sought first.
5. when testing, we should ask people in the factory to cooperate with each other for better operation.
6. determine the number of tests:
A. in general, it is necessary to make random checks on 10-20% according to the number of different numbers.
B. strict inspection of the goods extracted, if the final quality is qualified, then stop the inspection, show the whole batch of goods to be qualified; if there is a little or close to or exceed the scoring standard, then the remaining goods must be retested 10%. If the later quality is qualified, then we will drop all the unqualified goods in front of us. And so on; of course, the quality of the same rear is still not qualified, then it shows that the whole batch of goods is unqualified.
7. test procedure:
A. according to the quality requirements, according to the grading standard, strict grading, at the same time fill in the table.
B. can find out some special and unclear defects in the inspection process, and ask the factory's quality inspectors on the spot and pick up the defective samples.
C. must be strict in the process of inspection.
In conducting random checks, D. should be careful and meticulous, and act in accordance with logic and not be afraid of trouble.
8. determine whether all inspection items are missing.
9. the internal quality requirements of the factory to test and provide reports, some questionable defects also require factory testing.
In the course of the 10. test, if there is a quality problem, the company should report to the company in time, discuss the plan of specific processing, and notify the head of the factory at the same time, carry on the coordination and communication, so that the problem can be solved in time and accurately.
11. check the packing situation and check them one by one according to the specific packaging requirements of the company.
12. to ask for ship samples, samples and factory inspection reports to the factory, if you can not return to the company every other day, we should send back to the company in advance with the ship sample, fax the inspection report of each day back to the company. If the question is idiot, it should also be sent back to the company for early confirmation.
13. report the progress of production and inspection daily, seek the company's advice and arrange the next day's work.
14. end the test and leave the factory.